Recommended For:
Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bat / 5100 psi in all sizes. Small bend radius is an advantage in installations.

Performance:
Meets or Exceeds the Performance Requirements of: EN 856 Type R13, ISO 18752-CC, SAE 100R13.

Tube:
Black, oil resistant synthetic rubber.

Reinforcement:
Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.

Cover:
DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 & T7000 Series Crimp Couplings.

Features:
Tested to 1 million impulse cycles at up to 1/2 SAE 100R13 Minimum Bend Radius. Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.

Fras – Flame Resistance and Anti-Static:
DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

Temperature Range:
-40°C to +121°C, (-40°F to +250°F.)
For water, emulsions etc.

Working Pressure:
Maximum working pressures are based on 4:1 safety factor
(maximum working pressure to minimum burst pressure).